CPM Forum

Canadian Notes => Polymer Series => Topic started by: martin ph on December 31, 2013, 07:43:17 pm

Title: 20 polymer
Post by: martin ph on December 31, 2013, 07:43:17 pm

Has anybody seen a 20 with the bootom of the note look like its off a sheet with perforation?

Title: Re: 20 polymer
Post by: mmars on December 31, 2013, 07:50:48 pm

Have you?

Title: Re: 20 polymer
Post by: martin ph on January 01, 2014, 02:58:41 am

Yes I do have one, I does not look like a cut  or anything.

Title: Re: 20 polymer
Post by: friedsquid on January 01, 2014, 10:01:26 am

Quote from: martin ph on January 01, 2014, 02:58:41 am

Yes I do have one, I does not look like a cut  or anything.

can you post a picture of the note

Title: Re: 20 polymer
Post by: martin ph on January 01, 2014, 04:26:54 pm

I did send a scan  to get posted.
The ser # is FIL 2053176, and the edge is on the bootom of the note only, Plate/ position # are Back 13, front 13.
maybe the note was from the bottom of the sheet?

Title: Re: 20 polymer
Post by: Rupiah on January 01, 2014, 06:24:50 pm

Quote from: martin ph on January 01, 2014, 04:26:54 pm

I did send a scan  to get posted.
The ser # is FIL 2053176, and the edge is on the bootom of the note only, Plate/ position # are Back 13, front 13.
maybe the note was from the bottom of the sheet?

I believe that PN 13/13 would not be from the bottom of the sheet.

Also sheets do not typically have perforation so if you are thinking that some how a perforated part of the sheet got into your note than it would highly unlikely.

Does your note at all look like the note shown in the image :

http://img202.imageshack.us/img202/7392/0mtj.jpg

in this posting:

http://www.cdnpapermoney.com/forum/index.php?topic=13765.0

I have been keeping a database of number of different edge conditions with polymers and I would be very interested in seeing your image. If you are able to share it let me know. You can PM me.

Title: Re: 20 polymer
Post by: martin ph on January 02, 2014, 11:36:59 am

I did send a scan to Bob, I hope he can post it for me.

Title: Re: 20 polymer
Post by: Bob on January 03, 2014, 05:43:47 pm

Here is Martin's picture (I hope):
{http://img850.imageshack.us/img850/6682/cx1r.jpg:http://img850.imageshack.us/img850/6682/cx1r.th.jpg}