Author
Topic: Genereal ? about SNR notes  (Read 12039 times)
lara4228
  • Junior Member
  • **
  • Posts: 20
« on: February 27, 2011, 10:17:50 am »

I know that there are #'s that represent exactly where on the sheet the note was printed on, (Not too sure what they are called).

My question is, will these #'s show a person if the note is a SNR or not?

I've read the article posted on here regarding the SNR's and the whole process, but I can't seem to make heads or tails of it all.

Anyhelp would be greatly appreciated.

Thanks,

Lara
ikandiggit
  • Full Member
  • ***
  • Posts: 191
« Reply #1 on: February 27, 2011, 04:36:47 pm »

Front Plate Number and Back Plate Number

This link under FAQ'S will show you the location for each of the different series:

http://www.cdnpapermoney.com/forum/index.php?board=10.0

The plate numbers shows the position of the note on a sheet.

I don't know whether the plate numbers will help to indicate a replacement note. Maybe one of the Wiki people can help explain that.
mmars
  • Very Senior Member
  • *****
  • Posts: 1,352
  • money is gregarious
« Reply #2 on: February 27, 2011, 07:18:54 pm »

Any of the 45 positions on a sheet could be used as SNRs, so there's no relationship between position numbers and SNRs.

If you need to know if a note is an insert or not, check it against lists of serial number ranges that have been confirmed as insert ranges.  Lists are available in the Charlton catalogue, in the SNDB, and from Gilles Pomerleau who publishes them from time to time.

    No hay banda  
lara4228
  • Junior Member
  • **
  • Posts: 20
« Reply #3 on: February 27, 2011, 09:37:21 pm »

Lists are available in the Charlton catalogue, in the SNDB, and from Gilles Pomerleau who publishes them from time to time.

What does 3.040M-3.160M represent?  Because I am new to the game I do not understand all the lingo/slang and proper etiquette.

Sorry for being so new  ::)
1971HemiCuda
  • Wiki Editor
  • Very Senior Member
  • *****
  • Posts: 751
  • CPMS #1659
« Reply #4 on: February 27, 2011, 10:12:19 pm »

Quote
What does 3.040M-3.160M represent?
That represents the range that the insert is in. In this case serial numbers from 3,040,000 to 3,160,000.

Quote
Sorry for being so new
No problem, Welcome to the forum.


lara4228
  • Junior Member
  • **
  • Posts: 20
« Reply #5 on: February 27, 2011, 10:57:46 pm »

Thank you Hemi.
 

Login with username, password and session length